电蒸汽锅炉厂家介绍锅炉排污步骤

电蒸汽锅炉厂家http://www.no65h.com/介绍排污是蒸汽锅炉的重要环节,不过,在日常蒸汽锅炉使用及监管检验中,我们对蒸汽锅炉承压部分、炉体部分都较重视, 存在的问题都能及时按要求给予解决处理,而对于锅炉需要进行排污。

1、电蒸汽锅炉厂家介绍先开一次阀,再缓慢开启二次阀;排污前,保证是在高水位,低负荷的前提下进行排污。
Electric steam boiler manufacturers introduced the first open a valve, then slowly open the second valve; before discharge, to ensure that the sewage water level in the context of high and low loads.

2、电蒸汽锅炉厂家介绍首先打开炉前排污阀,再缓慢打开炉后排污阀,此步骤切记要缓慢打开,目的在于一是暖管,二是防止突然开启时,发生意外。
Electric steam boiler furnace manufacturers introduced first open the drain valve, then slowly open the drain valve after the furnace, this step remember to slowly open, one aimed at heating pipe, the second is to prevent a sudden turn when the accident occurred.

3、电蒸汽锅炉厂家介绍暖管时要缓慢开炉后排污阀至全开,然后再关闭此阀,再次打开炉后排污阀,再关闭,反复此操作二至三次(一般是三次),开启阀门时间控制在2-3秒,禁止两台锅炉同时进行排污。
Electric heating tube steam boiler manufacturers introduced after furnace slowly drain valve to open, and then close the valve and open the drain valve after the oven again, then close and repeated this two or three times (usually three times), open the valve timing control in 2-3 seconds, two boilers at the same time prohibiting the sewage.

5、电蒸汽锅炉厂家http://www.no65h.com/介绍在排污过程中,如锅炉发生事故,应立即停止排污,但汽包水位过高和汽水共腾除外。
Electric steam boiler manufacturers introduced in the sewage process, such as boiler accident, should immediately stop the sewage, but drum level is too high and Priming excluded.


上一条:电蒸汽锅炉的品质受哪些因素的影响?
下一条:电热水锅炉布袋除尘器如何设计?

热门产品推荐

东北女人啪啪对白,东北嫖妓对白粗口,东北亲子乱子伦视频免费,东北少妇不带套对白